Convenient hose application system system for Penimaster Pro

Code: SKU057	Back to category
	$35,00

Ask a question or write comment

ATTENTION! The vacuum chamber is shown only to demonstration.

Many users of the Penimaster Pro system need to remove/put on the system at work, for example, in the toilet. It is inconvenient to carry a big vacuum pump bulb with you, and standard hose applicatin system is a little inconvenient to use, because after sucking the head into the chamber, you need to pinch a piece of the hose (nipple) on the chamber with your fingers, then need to remove the hose fitting from the nipple chamber without releasing fingers and insert the metal plug into the nipple. Our system is equipped with the same semi-automatic connector as a standard Penimaster vacuum bulb and the process is as simple as possible. All that is required is to insert the chamber with the rotary valve screwed into the connector, turn the connector half a turn until it stops, evacuate the air from the chamber and when the head is completely sucked into the chamber, turn the connector back, the rotary valve will close automatically and the connector is removed from the chamber. The whole process takes a matter of seconds and just a few simple steps. Also, this system is very compact and fits in a pants pocket.